Jun 22, 2009
Jun 11, 2009
Chat with Friends through ms dos Command Prompt
1) All you need is your friend's IP Address and your Command Prompt.
2) Open Notepad and write this code as it is.....!
@echo off
:A
Cls
echo MESSENGER
set /p n=User:
set /p m=Message:
net send %n% %m%
Pause
Goto A
3) Now save this as "Messenger.Bat".
4) Open Command Prompt.
5) Drag this file (.bat file) over to Command Prompt and press Enter.
2) Open Notepad and write this code as it is.....!
@echo off
:A
Cls
echo MESSENGER
set /p n=User:
set /p m=Message:
net send %n% %m%
Pause
Goto A
3) Now save this as "Messenger.Bat".
4) Open Command Prompt.
5) Drag this file (.bat file) over to Command Prompt and press Enter.
Jun 8, 2009
Vodafone Hack For Free GPRS
This method has been tested on different mobiles and has been confirmed to be working.
Followng are the Settings you require to configure on your Mobile:
Account Name: Vodafone_gprs
Homepage: http://live.vodafone.in
User Name: (no need)
Pass: (no need)
Access Point Settings :-
Proxy: Enabled
Proxy Address: 10.10.1.100
Proxy Port: 9401
Data Bearer: Packet Data
Bearer Settings :-
Packet Data Access Point: portalnmms
Network type: IPV4
Authentication: normal
User Name: (no need)
Password: (no need)
*IF that happen this settings is not working then change the proxy port number to:-
Proxy Port: 9401
Followng are the Settings you require to configure on your Mobile:
Account Name: Vodafone_gprs
Homepage: http://live.vodafone.in
User Name: (no need)
Pass: (no need)
Access Point Settings :-
Proxy: Enabled
Proxy Address: 10.10.1.100
Proxy Port: 9401
Data Bearer: Packet Data
Bearer Settings :-
Packet Data Access Point: portalnmms
Network type: IPV4
Authentication: normal
User Name: (no need)
Password: (no need)
*IF that happen this settings is not working then change the proxy port number to:-
Proxy Port: 9401
Jun 6, 2009
-: Rapidshare Hack :-
There are two hacks to beat Rapidshare download limits and waiting time.
1) Rapidshare Hack (For Firefox Users) :-
The hot new Firefox plug-in takes browser customization to a whole new level by letting users filter site content or change page behaviors.
The glory of open-source software is that it allows anyone with the inclination and the scripting knowledge to get under the hood and hot-rod their computing environment.
But most of the time, that advantage is available only to people with the programming skills to make the changes they want.
That's where Greasemonkey, a free plug-in for Firefox, comes in -- it simplifies hacking the browser.
Released at the end 2004, Greasemonkey is the latest in a growing arsenal of Firefox customization tools.
It changes how Web pages look and act by altering the rendering process.
http://greasemonkey.mozdev.org/
1) Install the Greasemonkey extension>>
http://downloads.mozdev.org/greasemonkey/greasemonkey_0.2.6.xpi
2) Restart Firefox
3) Go to http://rapidshare.de/files/1034529/rapidshare.user.js.html
4) Right click on rapidshare.user.js and choose "Install User Script".
5) Run FireFox.
6) From 'File' Menu click on Open File then browse to whereever you saved the 'greasemonkey.xpi' plug-in.
Open it, wait a couple seconds for the install button becomes active.
7) Click on it to install this plug-in then CLOSE FIREFOX.
8) Run FireFox again.
From the File Menu click on Open File then browse to whereever you saved the 'rapidshare.user.js'.
9) Open it.
10) Click the Tools Menu then click on Install User Script then click OK.
11) Close FireFox.
The script will let you enjoy "no wait" and multiple file downloads......!
2) Rapidshare Hack (NIC Tricks and MAC Cloning) :-
Rapidshare traces the users IP address to limit each user to a certain amount of downloading per day.
To get around this, you need to show the rapidshare server a different IP address.
Here are some methods for doing this-
A] Short-Out the JavaScript:
1) Goto the page you want to download
2) Select FREE button
3) In the address bar put this- javascript:alert(c=0)
4) Click OK
5) Click OK to the pop-up box
6) Enter the captcha
7) Download Your File
B] Request a new IP address from your ISP server:
Here’s how to do it in windows:
1) Click Start
2) Click run
3) In the run box type cmd.exe and click OK
4) When the command prompt opens type the following. ENTER after each new line.
ipconfig /flushdns
ipconfig /release
ipconfig /renew
exit
5) Erase your cookies in whatever browser you are using.
6) Try the rapidshare download again.
Frequently you will be assigned a new IP address when this happens.
Sometime you will, sometimes you will not. If you are on a fixed IP address, this method will not work.
If this works for you, you may want to save the above commands into a batch file, and just run it when you need it.
C] Use a proxy with SwitchProxy and Firefox:
1) Download and install Firefox
2) Download and install SwitchProxy
3) Google for free proxies
4) When you hit your download limit, clean your cookies and change your proxy
D] You can use a bookmarklet to stop your wait times:
1) Open IE
2) Right Click On This Link
3) Select Add to Favorites
4) Select Yes to the warning that the bookmark may be unsafe.
5) Name it “RapidShare No Wait”
6) Click on the Links folder (if you want to display it in your IE toolbar)
7) Click OK
8) You may need to close and reopen IE to see it
9) Goto rapidshare and click the bookmarklet when you are forced to wait
1) Rapidshare Hack (For Firefox Users) :-
The hot new Firefox plug-in takes browser customization to a whole new level by letting users filter site content or change page behaviors.
The glory of open-source software is that it allows anyone with the inclination and the scripting knowledge to get under the hood and hot-rod their computing environment.
But most of the time, that advantage is available only to people with the programming skills to make the changes they want.
That's where Greasemonkey, a free plug-in for Firefox, comes in -- it simplifies hacking the browser.
Released at the end 2004, Greasemonkey is the latest in a growing arsenal of Firefox customization tools.
It changes how Web pages look and act by altering the rendering process.
http://greasemonkey.mozdev.org/
1) Install the Greasemonkey extension>>
http://downloads.mozdev.org/greasemonkey/greasemonkey_0.2.6.xpi
2) Restart Firefox
3) Go to http://rapidshare.de/files/1034529/rapidshare.user.js.html
4) Right click on rapidshare.user.js and choose "Install User Script".
5) Run FireFox.
6) From 'File' Menu click on Open File then browse to whereever you saved the 'greasemonkey.xpi' plug-in.
Open it, wait a couple seconds for the install button becomes active.
7) Click on it to install this plug-in then CLOSE FIREFOX.
8) Run FireFox again.
From the File Menu click on Open File then browse to whereever you saved the 'rapidshare.user.js'.
9) Open it.
10) Click the Tools Menu then click on Install User Script then click OK.
11) Close FireFox.
The script will let you enjoy "no wait" and multiple file downloads......!
2) Rapidshare Hack (NIC Tricks and MAC Cloning) :-
Rapidshare traces the users IP address to limit each user to a certain amount of downloading per day.
To get around this, you need to show the rapidshare server a different IP address.
Here are some methods for doing this-
A] Short-Out the JavaScript:
1) Goto the page you want to download
2) Select FREE button
3) In the address bar put this- javascript:alert(c=0)
4) Click OK
5) Click OK to the pop-up box
6) Enter the captcha
7) Download Your File
B] Request a new IP address from your ISP server:
Here’s how to do it in windows:
1) Click Start
2) Click run
3) In the run box type cmd.exe and click OK
4) When the command prompt opens type the following. ENTER after each new line.
ipconfig /flushdns
ipconfig /release
ipconfig /renew
exit
5) Erase your cookies in whatever browser you are using.
6) Try the rapidshare download again.
Frequently you will be assigned a new IP address when this happens.
Sometime you will, sometimes you will not. If you are on a fixed IP address, this method will not work.
If this works for you, you may want to save the above commands into a batch file, and just run it when you need it.
C] Use a proxy with SwitchProxy and Firefox:
1) Download and install Firefox
2) Download and install SwitchProxy
3) Google for free proxies
4) When you hit your download limit, clean your cookies and change your proxy
D] You can use a bookmarklet to stop your wait times:
1) Open IE
2) Right Click On This Link
3) Select Add to Favorites
4) Select Yes to the warning that the bookmark may be unsafe.
5) Name it “RapidShare No Wait”
6) Click on the Links folder (if you want to display it in your IE toolbar)
7) Click OK
8) You may need to close and reopen IE to see it
9) Goto rapidshare and click the bookmarklet when you are forced to wait
Sitemeter Hack – Hide Visual Tracker (Counter)
Sitemeter, one of the best traffic counter for websites/blogs, it shows online users, Referrals (From where people coming to your site), country locations, browser etc etc.. all in detail.
This counter is visible to all visitors.
Invisible Counters (Tracker) is available for Premium Accounts Only…!
But you can easily hack to hide it.
Its just few setting changes which will work fine.
1) Login into your sitemeter account.
2) Go to ‘Manager’ from top menu.
3) Go to ‘Meter Style’ option from left hand menu.
4) Select 2nd last meter style (Counter, which shows simple numbers).previewmeter
5) Now in “DIGIT COLOR” select ‘Transparent’, Similarly in “BACKGROUND COLOR” select ‘Transparent’.
6) DONE.
Now your sitemeter counter is invisible from normal eyes in your site
Place it anywhere in your website/blog, and track your traffic, users.
Enjoy…..!
This counter is visible to all visitors.
Invisible Counters (Tracker) is available for Premium Accounts Only…!
But you can easily hack to hide it.
Its just few setting changes which will work fine.
1) Login into your sitemeter account.
2) Go to ‘Manager’ from top menu.
3) Go to ‘Meter Style’ option from left hand menu.
4) Select 2nd last meter style (Counter, which shows simple numbers).previewmeter
5) Now in “DIGIT COLOR” select ‘Transparent’, Similarly in “BACKGROUND COLOR” select ‘Transparent’.
6) DONE.
Now your sitemeter counter is invisible from normal eyes in your site
Place it anywhere in your website/blog, and track your traffic, users.
Enjoy…..!
Jun 3, 2009
-: Creating IM Bot :-
This quick tutorial will show you how to develop your own functional IM bot that works with Google Talk, Yahoo! Messenger, Windows Live and all other popular instant messaging clients.
To get started, all you need to know are some very basic programming skills (any language would do) and web space to host your “bot”.
For this example, I have created a dummy bot called “insecure” that listens to your IM messages. To see this live, add insecure@bot.im to your GTalk buddy list and start chatting.
If you like to write a personal IM bot, just follow these simple steps:-
Step 1: Go to www.imified.com and register a new account with a bot.
Step 2: Now it’s time to create a bot which is actually a simple script that resides on your public web server.
It could be in PHP, Perl, Python or any other language.
Example Hello World bot:
The example below illustrates just how easy it is to create a bot.
This example is coded in PHP.
switch ($_REQUEST['step']) {
case 1:
echo "Hi, what's your name?";
break;
case 2:
echo "Hi " . $_REQUEST['value1'] . ", where do you live?";
break;
case 3:
echo "Well, welcome to this hello world bot, " . $_REQUEST['value1'] . "
from " . $_REQUEST['value2'] . ".";
break;
}
?>
Step 3: Once your script is ready, put it somewhere on your web server and copy the full URL to the clipboard.
Step 4: Now login to your imified account, paste the script URL
Screen Name: insecure@bot.im
Bot Script URL: http://www.insecure.in/imbot.php
Step 5: Add that im bot your friends list. That’s it.
This is a very basic bot but the possibilities are endless.
For instance, you could write a bot that will send an email to all your close friends via a simple IM message. Or you could write one that will does currency conversion.
To get started, all you need to know are some very basic programming skills (any language would do) and web space to host your “bot”.
For this example, I have created a dummy bot called “insecure” that listens to your IM messages. To see this live, add insecure@bot.im to your GTalk buddy list and start chatting.
If you like to write a personal IM bot, just follow these simple steps:-
Step 1: Go to www.imified.com and register a new account with a bot.
Step 2: Now it’s time to create a bot which is actually a simple script that resides on your public web server.
It could be in PHP, Perl, Python or any other language.
Example Hello World bot:
The example below illustrates just how easy it is to create a bot.
This example is coded in PHP.
switch ($_REQUEST['step']) {
case 1:
echo "Hi, what's your name?";
break;
case 2:
echo "Hi " . $_REQUEST['value1'] . ", where do you live?";
break;
case 3:
echo "Well, welcome to this hello world bot, " . $_REQUEST['value1'] . "
from " . $_REQUEST['value2'] . ".
break;
}
?>
Step 3: Once your script is ready, put it somewhere on your web server and copy the full URL to the clipboard.
Step 4: Now login to your imified account, paste the script URL
Screen Name: insecure@bot.im
Bot Script URL: http://www.insecure.in/imbot.php
Step 5: Add that im bot your friends list. That’s it.
This is a very basic bot but the possibilities are endless.
For instance, you could write a bot that will send an email to all your close friends via a simple IM message. Or you could write one that will does currency conversion.
-: Remotely Shutdown Your Computer With Cellphone :-
This video will show you how to shutdown your computer from anywhere using a cell phone, Microsoft Outlook and a free account from www.kwiry.com